This is the latest recevied telemetry packets stored in our database for station/object CT4TX-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769932555 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1769931654 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1769930753 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1769929853 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1769928952 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1769928051 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1769927151 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1769926250 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1769925349 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1769925229 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1769924971 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1769924071 | 0 VDC | 5.12 VDC | 0 | 0 | 0 |
| 1769924041 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1769923716 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1769922920 | 0 VDC | 5.12 VDC | 0 | 0 | 0 |
| 1769922020 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1769921119 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1769920218 | 0 VDC | 5.1 VDC | 0 | 0 | 0 |
| 1769919318 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1769918417 | 0 VDC | 5.12 VDC | 0 | 0 | 0 |
| 1769917516 | 0 VDC | 5.12 VDC | 0 | 0 | 0 |
| 1769916616 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1769915715 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1769914814 | 0 VDC | 5.12 VDC | 0 | 0 | 0 |
| 1769913914 | 0 VDC | 5.14 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)