This is the latest recevied telemetry packets stored in our database for station/object SP2SGQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762253256 | 144 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762252355 | 143 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762251455 | 142 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762250554 | 141 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762249654 | 140 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762248753 | 139 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762247852 | 138 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762246952 | 137 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762246051 | 136 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762245150 | 135 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762244250 | 134 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762243349 | 133 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762242448 | 132 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762241548 | 131 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762240647 | 130 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762239746 | 129 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762238846 | 128 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762237960 | 127 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762237060 | 126 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762236159 | 125 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762235258 | 124 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762234358 | 123 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762233457 | 122 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762232557 | 121 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762231656 | 120 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)