This is the latest recevied telemetry packets stored in our database for station/object SP2KFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789244520 | 181 Count | 719 Count | 169 Count | 4.09 VDC | 0 VDC |
| 1789242719 | 157 Count | 626 Count | 146 Count | 4.09 VDC | 0 VDC |
| 1789240918 | 132 Count | 507 Count | 122 Count | 4.09 VDC | 0 VDC |
| 1789239117 | 115 Count | 430 Count | 106 Count | 4.09 VDC | 0 VDC |
| 1789237317 | 98 Count | 368 Count | 90 Count | 4.09 VDC | 0 VDC |
| 1789235516 | 82 Count | 292 Count | 75 Count | 4.09 VDC | 0 VDC |
| 1789233723 | 63 Count | 233 Count | 61 Count | 4.1 VDC | 0 VDC |
| 1789231923 | 50 Count | 174 Count | 49 Count | 4.1 VDC | 0 VDC |
| 1789230122 | 28 Count | 102 Count | 28 Count | 4.13 VDC | 0 VDC |
| 1789228321 | 301 Count | 1146 Count | 273 Count | 4.1 VDC | 0 VDC |
| 1789226521 | 249 Count | 978 Count | 222 Count | 4.11 VDC | 0 VDC |
| 1789224720 | 237 Count | 917 Count | 211 Count | 4.11 VDC | 0 VDC |
| 1789222919 | 224 Count | 850 Count | 199 Count | 4.11 VDC | 0 VDC |
| 1789221118 | 211 Count | 775 Count | 187 Count | 4.1 VDC | 0 VDC |
| 1789219318 | 198 Count | 723 Count | 175 Count | 4.11 VDC | 0 VDC |
| 1789217517 | 186 Count | 683 Count | 164 Count | 4.1 VDC | 0 VDC |
| 1789215716 | 173 Count | 643 Count | 152 Count | 4.1 VDC | 0 VDC |
| 1789213915 | 166 Count | 620 Count | 146 Count | 4.09 VDC | 0 VDC |
| 1789212123 | 150 Count | 576 Count | 135 Count | 4.12 VDC | 0 VDC |
| 1789210322 | 138 Count | 530 Count | 124 Count | 4.09 VDC | 0 VDC |
| 1789208522 | 125 Count | 481 Count | 112 Count | 4.09 VDC | 0 VDC |
| 1789206721 | 113 Count | 440 Count | 101 Count | 4.1 VDC | 0 VDC |
| 1789204920 | 91 Count | 382 Count | 80 Count | 4.13 VDC | 0 VDC |
| 1789203119 | 78 Count | 334 Count | 68 Count | 4.09 VDC | 0 VDC |
| 1789201319 | 66 Count | 287 Count | 57 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)