This is the latest recevied telemetry packets stored in our database for station/object SP2KFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789006914 | 233 Count | 976 Count | 216 Count | 4.11 VDC | 0 VDC |
| 1789005113 | 220 Count | 927 Count | 204 Count | 4.09 VDC | 0 VDC |
| 1789003313 | 207 Count | 874 Count | 192 Count | 4.11 VDC | 0 VDC |
| 1789001512 | 194 Count | 807 Count | 180 Count | 4.09 VDC | 0 VDC |
| 1788999711 | 181 Count | 734 Count | 168 Count | 4.11 VDC | 0 VDC |
| 1788997911 | 167 Count | 668 Count | 155 Count | 4.13 VDC | 0 VDC |
| 1788996120 | 149 Count | 593 Count | 142 Count | 4.09 VDC | 0 VDC |
| 1788994319 | 136 Count | 533 Count | 130 Count | 4.1 VDC | 0 VDC |
| 1788992518 | 118 Count | 461 Count | 113 Count | 4.12 VDC | 0 VDC |
| 1788990718 | 96 Count | 385 Count | 92 Count | 4.08 VDC | 0 VDC |
| 1788988917 | 76 Count | 309 Count | 73 Count | 4.1 VDC | 0 VDC |
| 1788987116 | 52 Count | 212 Count | 50 Count | 4.1 VDC | 0 VDC |
| 1788985314 | 34 Count | 141 Count | 33 Count | 4.1 VDC | 0 VDC |
| 1788983513 | 13 Count | 60 Count | 13 Count | 4.11 VDC | 0 VDC |
| 1788981713 | 286 Count | 1005 Count | 270 Count | 4.09 VDC | 0 VDC |
| 1788979912 | 271 Count | 943 Count | 256 Count | 4.11 VDC | 0 VDC |
| 1788978111 | 257 Count | 885 Count | 243 Count | 4.08 VDC | 0 VDC |
| 1788976310 | 253 Count | 867 Count | 240 Count | 4.08 VDC | 0 VDC |
| 1788974518 | 235 Count | 805 Count | 227 Count | 4.09 VDC | 0 VDC |
| 1788972717 | 207 Count | 701 Count | 200 Count | 4.11 VDC | 0 VDC |
| 1788970916 | 183 Count | 615 Count | 177 Count | 4.09 VDC | 0 VDC |
| 1788969116 | 155 Count | 523 Count | 150 Count | 4.09 VDC | 0 VDC |
| 1788967315 | 123 Count | 409 Count | 119 Count | 4.11 VDC | 0 VDC |
| 1788965514 | 85 Count | 300 Count | 82 Count | 4.09 VDC | 0 VDC |
| 1788963714 | 45 Count | 181 Count | 43 Count | 4.1 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)