EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

SP2ROC-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2ROC-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RPM*	VBAT*	TEMP*	TRIP*	MTH*
1773581334	772 rpm	14.61 V	58 degC	1 km	8
1773581273	1629 rpm	14.61 V	54 degC	0.9 km	8
1773581213	1979 rpm	13.64 V	49 degC	0.7 km	8
1773581153	1716 rpm	13.98 V	44 degC	0.6 km	8
1773581093	784 rpm	13.53 V	38 degC	0.5 km	8
1773581033	1676 rpm	13.66 V	31 degC	0.3 km	8
1773580816	963 rpm	12.59 V	14 degC	0 km	8
1773580756	0 rpm	12.76 V	14 degC	0 km	8
1773580696	0 rpm	12.76 V	14 degC	0 km	8
1773580636	0 rpm	12.76 V	14 degC	0 km	8
1773580576	0 rpm	12.76 V	14 degC	0 km	8
1773580516	0 rpm	12.76 V	14 degC	0 km	8
1773580456	0 rpm	12.76 V	14 degC	0 km	8
1773580336	0 rpm	12.76 V	14 degC	0 km	8
1773580276	0 rpm	12.76 V	14 degC	0 km	8
1773580216	0 rpm	12.76 V	14 degC	0 km	8
1773580156	0 rpm	12.76 V	14 degC	0 km	8
1773580096	0 rpm	12.76 V	14 degC	0 km	8
1773580036	0 rpm	12.76 V	14 degC	0 km	8
1773579916	0 rpm	12.76 V	15 degC	0 km	8
1773579856	0 rpm	12.76 V	15 degC	0 km	8
1773579796	0 rpm	12.76 V	15 degC	0 km	8
1773579736	0 rpm	12.76 V	15 degC	0 km	8
1773579676	0 rpm	12.76 V	15 degC	0 km	8
1773579616	0 rpm	12.76 V	15 degC	0 km	8

*Used Equation Coefficients:

RPM: 0, 1, 0

VBAT: 0, 0.01, 0

TEMP: 0, 1, -100

TRIP: 0, 0.1, 0

MTH: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)