This is the latest recevied telemetry packets stored in our database for station/object F1ZDB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | RX* | Relay* | Drop* | Value5* |
|---|---|---|---|---|---|
| 1789240284 | 4.28 VDC | 44 pkt | 17 pkt | 27 pkt | 0 |
| 1789239384 | 4.3 VDC | 47 pkt | 19 pkt | 28 pkt | 0 |
| 1789238484 | 4.29 VDC | 53 pkt | 14 pkt | 39 pkt | 0 |
| 1789237582 | 4.29 VDC | 0 pkt | 0 pkt | 0 pkt | 0 |
| 1789236692 | 4.3 VDC | 81 pkt | 30 pkt | 51 pkt | 0 |
| 1789235791 | 4.28 VDC | 69 pkt | 29 pkt | 40 pkt | 0 |
| 1789234891 | 4.3 VDC | 42 pkt | 19 pkt | 23 pkt | 0 |
| 1789233991 | 4.3 VDC | 38 pkt | 13 pkt | 25 pkt | 0 |
| 1789233091 | 4.29 VDC | 36 pkt | 18 pkt | 18 pkt | 0 |
| 1789232191 | 4.3 VDC | 39 pkt | 18 pkt | 21 pkt | 0 |
| 1789231290 | 4.29 VDC | 39 pkt | 15 pkt | 24 pkt | 0 |
| 1789230390 | 4.3 VDC | 38 pkt | 21 pkt | 17 pkt | 0 |
| 1789229490 | 4.29 VDC | 36 pkt | 18 pkt | 18 pkt | 0 |
| 1789228590 | 4.29 VDC | 35 pkt | 15 pkt | 20 pkt | 0 |
| 1789227689 | 4.3 VDC | 40 pkt | 17 pkt | 23 pkt | 0 |
| 1789226789 | 4.29 VDC | 62 pkt | 18 pkt | 44 pkt | 0 |
| 1789225889 | 4.29 VDC | 41 pkt | 17 pkt | 24 pkt | 0 |
| 1789224989 | 4.29 VDC | 35 pkt | 16 pkt | 19 pkt | 0 |
| 1789224089 | 4.3 VDC | 37 pkt | 16 pkt | 21 pkt | 0 |
| 1789223188 | 4.3 VDC | 41 pkt | 13 pkt | 28 pkt | 0 |
| 1789222288 | 4.29 VDC | 34 pkt | 16 pkt | 18 pkt | 0 |
| 1789221388 | 4.29 VDC | 35 pkt | 16 pkt | 19 pkt | 0 |
| 1789220487 | 4.3 VDC | 38 pkt | 14 pkt | 24 pkt | 0 |
| 1789219587 | 4.29 VDC | 36 pkt | 14 pkt | 22 pkt | 0 |
| 1789218687 | 4.3 VDC | 40 pkt | 19 pkt | 21 pkt | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
RX: 0, 1, 0
Relay: 0, 1, 0
Drop: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)