This is the latest recevied telemetry packets stored in our database for station/object DO7LM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762165894 | 3.71 V | 30 | 0 | 0 | 0 |
| 1762165777 | 3.71 V | 29 | 0 | 0 | 0 |
| 1762165660 | 3.71 V | 31 | 0 | 0 | 0 |
| 1762165543 | 3.71 V | 30 | 0 | 0 | 0 |
| 1762165426 | 3.61 V | 28 | 0 | 0 | 0 |
| 1762165309 | 3.6 V | 30 | 0 | 0 | 0 |
| 1762165192 | 3.71 V | 30 | 0 | 0 | 0 |
| 1762165075 | 3.73 V | 29 | 0 | 0 | 0 |
| 1762164956 | 3.73 V | 32 | 0 | 0 | 0 |
| 1762164839 | 3.71 V | 33 | 0 | 0 | 0 |
| 1762164722 | 3.72 V | 29 | 0 | 0 | 0 |
| 1762164483 | 3.73 V | 31 | 0 | 0 | 0 |
| 1762164366 | 3.73 V | 30 | 0 | 0 | 0 |
| 1762164248 | 3.62 V | 29 | 0 | 0 | 0 |
| 1762164131 | 3.73 V | 27 | 0 | 0 | 0 |
| 1762164014 | 3.74 V | 27 | 0 | 0 | 0 |
| 1762163897 | 3.61 V | 30 | 0 | 0 | 0 |
| 1762163780 | 3.74 V | 28 | 0 | 0 | 0 |
| 1762163663 | 3.74 V | 30 | 0 | 0 | 0 |
| 1762163546 | 3.74 V | 29 | 0 | 0 | 0 |
| 1762163428 | 3.74 V | 29 | 0 | 0 | 0 |
| 1762163311 | 3.78 V | 28 | 0 | 0 | 0 |
| 1762163193 | 3.75 V | 26 | 0 | 0 | 0 |
| 1762163075 | 3.77 V | 28 | 0 | 0 | 0 |
| 1762162958 | 3.75 V | 27 | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0.01
Satellite: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)