This is the latest recevied telemetry packets stored in our database for station/object HG8LXL-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1788967181 | 2.1 VDC | 32.6 C | 16.77 % | 1008.63 hPa | 0 |
| 1788966795 | 2.33 VDC | 32.9 C | 14.79 % | 1008 hPa | 0 |
| 1788966471 | 2.33 VDC | 34.6 C | 14.38 % | 1008 hPa | 0 |
| 1788963920 | 2.1 VDC | 36.4 C | 20.96 % | 1010.13 hPa | 0 |
| 1788958089 | 2.35 VDC | 30.7 C | 19.65 % | 1010.63 hPa | 0 |
| 1788957569 | 2.36 VDC | 31.7 C | 16.72 % | 1010.13 hPa | 0 |
| 1788957219 | 2.35 VDC | 35.5 C | 13.1 % | 1010.38 hPa | 0 |
| 1788951481 | 2.38 VDC | 32.4 C | 31.37 % | 1001.13 hPa | 0 |
| 1788942851 | 2.43 VDC | 27 C | 21.45 % | 1012 hPa | 0 |
| 1788942477 | 2.43 VDC | 27.8 C | 20.5 % | 1011.75 hPa | 0 |
| 1788942034 | 2.43 VDC | 26.7 C | 25.73 % | 1011.88 hPa | 0 |
| 1788940221 | 2.43 VDC | 27.9 C | 21.24 % | 1011.88 hPa | 0 |
| 1788939788 | 2.43 VDC | 26.9 C | 24.41 % | 1012.5 hPa | 0 |
| 1788938510 | 2.04 VDC | 25.4 C | 34.14 % | 1002.25 hPa | 0 |
| 1788938496 | 2.04 VDC | 25.1 C | 35.39 % | 1002.13 hPa | 0 |
| 1788938477 | 2.04 VDC | 24.9 C | 35.6 % | 1012.75 hPa | 0 |
| 1788938428 | 2.04 VDC | 24.6 C | 33.88 % | 1012.63 hPa | 0 |
| 1788938404 | 2.01 VDC | 24.5 C | 33.82 % | 1010.88 hPa | 0 |
| 1788935704 | 2.04 VDC | 17.4 C | 43.69 % | 1002.25 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)