This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789237194 | 41 Count | 424 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1789236293 | 40 Count | 400 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1789235393 | 39 Count | 362 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1789234492 | 38 Count | 319 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1789233590 | 37 Count | 308 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1789232726 | 36 Count | 299 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1789231825 | 35 Count | 289 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1789230924 | 34 Count | 278 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1789230023 | 33 Count | 268 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1789229122 | 32 Count | 257 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1789228221 | 31 Count | 245 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1789227320 | 30 Count | 236 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1789226420 | 29 Count | 225 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1789225519 | 28 Count | 217 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1789224618 | 27 Count | 212 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789223717 | 26 Count | 205 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789222816 | 25 Count | 198 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1789221915 | 24 Count | 187 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1789221015 | 23 Count | 176 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1789220113 | 22 Count | 168 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1789219212 | 21 Count | 161 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1789218311 | 20 Count | 151 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789217411 | 19 Count | 144 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1789216510 | 18 Count | 133 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1789215609 | 17 Count | 121 Count | 0 Count | 4.19 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)