This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791234155 | 12 Count | 126 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1791233254 | 11 Count | 115 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1791232353 | 10 Count | 104 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1791231452 | 9 Count | 95 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1791230552 | 8 Count | 83 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1791229651 | 7 Count | 75 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1791228750 | 6 Count | 65 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1791227849 | 5 Count | 55 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1791226948 | 4 Count | 45 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1791226048 | 3 Count | 36 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1791225147 | 2 Count | 26 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1791224246 | 1 Count | 17 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1791223345 | 0 Count | 9 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1791222444 | 102 Count | 1004 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1791221543 | 101 Count | 997 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1791220642 | 100 Count | 990 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1791219742 | 99 Count | 984 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1791218841 | 98 Count | 973 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1791217940 | 97 Count | 967 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1791217039 | 96 Count | 957 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1791216138 | 95 Count | 949 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1791215238 | 94 Count | 941 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1791214337 | 93 Count | 931 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1791213436 | 92 Count | 922 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1791212535 | 91 Count | 912 Count | 0 Count | 4.19 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)