This is the latest recevied telemetry packets stored in our database for station/object N7UV-93. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1761313096 | 4.16 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1761312196 | 4.15 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1761311295 | 4.14 VDC | 0.88 VDC | 0 | 0 | 0 |
| 1761310395 | 4.14 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1761309495 | 4.13 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1761308595 | 4.18 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1761307695 | 4.16 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1761306795 | 4.16 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1761305894 | 4.19 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1761304994 | 4.16 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1761304094 | 4.12 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1761303194 | 4.12 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1761301393 | 4.13 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1761300493 | 4.16 VDC | 0.88 VDC | 0 | 0 | 0 |
| 1761299593 | 4.14 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1761298693 | 4.18 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1761297792 | 4.17 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1761296892 | 4.15 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1761295992 | 4.16 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1761295092 | 4.13 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1761294192 | 4.13 VDC | 0.88 VDC | 0 | 0 | 0 |
| 1761293292 | 4.17 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1761292391 | 4.16 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1761291491 | 4.19 VDC | 0.72 VDC | 0 | 0 | 0 |
| 1761290591 | 4.12 VDC | 0.86 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)