This is the latest recevied telemetry packets stored in our database for station/object EA5DHO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789209167 | 0 Count | 316 Count | 0 Count | 0 VDC | 0 VDC |
| 1789208267 | 0 Count | 283 Count | 0 Count | 0 VDC | 0 VDC |
| 1789207367 | 0 Count | 249 Count | 0 Count | 0 VDC | 0 VDC |
| 1789206467 | 0 Count | 193 Count | 0 Count | 0 VDC | 0 VDC |
| 1789205567 | 0 Count | 153 Count | 0 Count | 0 VDC | 0 VDC |
| 1789204665 | 0 Count | 121 Count | 0 Count | 0 VDC | 0 VDC |
| 1789203765 | 0 Count | 77 Count | 0 Count | 0 VDC | 0 VDC |
| 1789202865 | 0 Count | 39 Count | 0 Count | 0 VDC | 0 VDC |
| 1789201965 | 0 Count | 1024 Count | 0 Count | 0 VDC | 0 VDC |
| 1789201065 | 0 Count | 987 Count | 0 Count | 0 VDC | 0 VDC |
| 1789200165 | 0 Count | 947 Count | 0 Count | 0 VDC | 0 VDC |
| 1789199265 | 0 Count | 879 Count | 0 Count | 0 VDC | 0 VDC |
| 1789198365 | 0 Count | 791 Count | 0 Count | 0 VDC | 0 VDC |
| 1789197465 | 0 Count | 719 Count | 0 Count | 0 VDC | 0 VDC |
| 1789196565 | 0 Count | 664 Count | 0 Count | 0 VDC | 0 VDC |
| 1789195665 | 0 Count | 615 Count | 0 Count | 0 VDC | 0 VDC |
| 1789194765 | 0 Count | 581 Count | 0 Count | 0 VDC | 0 VDC |
| 1789193865 | 0 Count | 521 Count | 0 Count | 0 VDC | 0 VDC |
| 1789192965 | 0 Count | 479 Count | 0 Count | 0 VDC | 0 VDC |
| 1789192064 | 0 Count | 441 Count | 0 Count | 0 VDC | 0 VDC |
| 1789191164 | 0 Count | 406 Count | 0 Count | 0 VDC | 0 VDC |
| 1789190264 | 0 Count | 384 Count | 0 Count | 0 VDC | 0 VDC |
| 1789189364 | 0 Count | 353 Count | 0 Count | 0 VDC | 0 VDC |
| 1789188464 | 0 Count | 324 Count | 0 Count | 0 VDC | 0 VDC |
| 1789187564 | 0 Count | 295 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)