This is the latest recevied telemetry packets stored in our database for station/object EA5DHO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765053917 | 0 Count | 834 Count | 0 Count | 0 VDC | 0 VDC |
| 1765053017 | 0 Count | 716 Count | 0 Count | 0 VDC | 0 VDC |
| 1765052117 | 0 Count | 596 Count | 0 Count | 0 VDC | 0 VDC |
| 1765051217 | 0 Count | 470 Count | 0 Count | 0 VDC | 0 VDC |
| 1765050317 | 0 Count | 344 Count | 0 Count | 0 VDC | 0 VDC |
| 1765049417 | 0 Count | 225 Count | 0 Count | 0 VDC | 0 VDC |
| 1765048517 | 0 Count | 118 Count | 0 Count | 0 VDC | 0 VDC |
| 1765047617 | 0 Count | 1052 Count | 0 Count | 0 VDC | 0 VDC |
| 1765046717 | 0 Count | 932 Count | 0 Count | 0 VDC | 0 VDC |
| 1765045817 | 0 Count | 806 Count | 0 Count | 0 VDC | 0 VDC |
| 1765044917 | 0 Count | 689 Count | 0 Count | 0 VDC | 0 VDC |
| 1765044017 | 0 Count | 564 Count | 0 Count | 0 VDC | 0 VDC |
| 1765043117 | 0 Count | 460 Count | 0 Count | 0 VDC | 0 VDC |
| 1765042217 | 0 Count | 336 Count | 0 Count | 0 VDC | 0 VDC |
| 1765041317 | 0 Count | 227 Count | 0 Count | 0 VDC | 0 VDC |
| 1765040417 | 0 Count | 107 Count | 0 Count | 0 VDC | 0 VDC |
| 1765039519 | 0 Count | 1022 Count | 0 Count | 0 VDC | 0 VDC |
| 1765038619 | 0 Count | 902 Count | 0 Count | 0 VDC | 0 VDC |
| 1765037719 | 0 Count | 791 Count | 0 Count | 0 VDC | 0 VDC |
| 1765036818 | 0 Count | 677 Count | 0 Count | 0 VDC | 0 VDC |
| 1765035918 | 0 Count | 569 Count | 0 Count | 0 VDC | 0 VDC |
| 1765035017 | 0 Count | 467 Count | 0 Count | 0 VDC | 0 VDC |
| 1765034117 | 0 Count | 353 Count | 0 Count | 0 VDC | 0 VDC |
| 1765033217 | 0 Count | 233 Count | 0 Count | 0 VDC | 0 VDC |
| 1765032317 | 0 Count | 111 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)