This is the latest recevied telemetry packets stored in our database for station/object LD9NK-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1783384973 | 4.09 VDC | 13.54 VDC | 0 | 0 | 0 |
| 1783384073 | 4.06 VDC | 13.56 VDC | 0 | 0 | 0 |
| 1783383173 | 4.05 VDC | 13.56 VDC | 0 | 0 | 0 |
| 1783382273 | 4.08 VDC | 13.58 VDC | 0 | 0 | 0 |
| 1783381374 | 4.04 VDC | 13.58 VDC | 0 | 0 | 0 |
| 1783380474 | 4.06 VDC | 13.58 VDC | 0 | 0 | 0 |
| 1783379573 | 4.07 VDC | 13.58 VDC | 0 | 0 | 0 |
| 1783378674 | 4.05 VDC | 13.58 VDC | 0 | 0 | 0 |
| 1783377775 | 4.07 VDC | 13.58 VDC | 0 | 0 | 0 |
| 1783376875 | 4.07 VDC | 13.6 VDC | 0 | 0 | 0 |
| 1783375976 | 4.04 VDC | 13.6 VDC | 0 | 0 | 0 |
| 1783375077 | 4.06 VDC | 13.62 VDC | 0 | 0 | 0 |
| 1783374178 | 4.08 VDC | 13.6 VDC | 0 | 0 | 0 |
| 1783373277 | 4.08 VDC | 13.62 VDC | 0 | 0 | 0 |
| 1783372377 | 4.08 VDC | 13.62 VDC | 0 | 0 | 0 |
| 1783371478 | 4.05 VDC | 13.64 VDC | 0 | 0 | 0 |
| 1783370578 | 4.07 VDC | 13.64 VDC | 0 | 0 | 0 |
| 1783369679 | 4.07 VDC | 13.66 VDC | 0 | 0 | 0 |
| 1783368780 | 4.09 VDC | 13.66 VDC | 0 | 0 | 0 |
| 1783367880 | 4.09 VDC | 13.66 VDC | 0 | 0 | 0 |
| 1783366981 | 4.06 VDC | 13.66 VDC | 0 | 0 | 0 |
| 1783366081 | 4.13 VDC | 13.68 VDC | 0 | 0 | 0 |
| 1783365181 | 4.09 VDC | 13.68 VDC | 0 | 0 | 0 |
| 1783364280 | 4.07 VDC | 13.7 VDC | 0 | 0 | 0 |
| 1783363380 | 4.07 VDC | 13.7 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)