This is the latest recevied telemetry packets stored in our database for station/object SP9KKK-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792920611 | 132 Count | 466 Count | 128 Count | 4.03 VDC | 0 VDC |
| 1792919710 | 106 Count | 380 Count | 103 Count | 4.04 VDC | 0 VDC |
| 1792918809 | 84 Count | 304 Count | 82 Count | 4.02 VDC | 0 VDC |
| 1792917908 | 62 Count | 223 Count | 61 Count | 4.02 VDC | 0 VDC |
| 1792917007 | 35 Count | 125 Count | 35 Count | 4.02 VDC | 0 VDC |
| 1792916106 | 249 Count | 1019 Count | 242 Count | 4.02 VDC | 0 VDC |
| 1792915205 | 227 Count | 944 Count | 221 Count | 4.01 VDC | 0 VDC |
| 1792914304 | 203 Count | 863 Count | 198 Count | 4.02 VDC | 0 VDC |
| 1792913403 | 184 Count | 779 Count | 180 Count | 4.01 VDC | 0 VDC |
| 1792912502 | 146 Count | 647 Count | 143 Count | 4.02 VDC | 0 VDC |
| 1792911601 | 103 Count | 448 Count | 101 Count | 4.02 VDC | 0 VDC |
| 1792910701 | 53 Count | 230 Count | 52 Count | 4.02 VDC | 0 VDC |
| 1792909800 | 21 Count | 103 Count | 21 Count | 4 VDC | 0 VDC |
| 1792908899 | 241 Count | 1092 Count | 229 Count | 3.98 VDC | 0 VDC |
| 1792907998 | 217 Count | 988 Count | 206 Count | 3.87 VDC | 0 VDC |
| 1792907097 | 191 Count | 873 Count | 181 Count | 3.87 VDC | 0 VDC |
| 1792906196 | 166 Count | 759 Count | 157 Count | 3.89 VDC | 0 VDC |
| 1792905296 | 128 Count | 579 Count | 120 Count | 3.86 VDC | 0 VDC |
| 1792904414 | 96 Count | 423 Count | 93 Count | 3.87 VDC | 0 VDC |
| 1792903514 | 71 Count | 324 Count | 69 Count | 3.87 VDC | 0 VDC |
| 1792902613 | 46 Count | 198 Count | 45 Count | 3.87 VDC | 0 VDC |
| 1792901711 | 23 Count | 111 Count | 23 Count | 3.87 VDC | 0 VDC |
| 1792900810 | 213 Count | 1003 Count | 205 Count | 3.87 VDC | 0 VDC |
| 1792899909 | 192 Count | 912 Count | 185 Count | 3.87 VDC | 0 VDC |
| 1792899009 | 165 Count | 775 Count | 159 Count | 3.88 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)