This is the latest recevied telemetry packets stored in our database for station/object DO7LM-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1781012371 | 3.49 V | 37 | 0 | 0 | 0 |
| 1781012254 | 3.26 V | 35 | 0 | 0 | 0 |
| 1781012137 | 3.49 V | 27 | 0 | 0 | 0 |
| 1781012020 | 3.26 V | 34 | 0 | 0 | 0 |
| 1781011903 | 3.48 V | 34 | 0 | 0 | 0 |
| 1781011786 | 3.52 V | 34 | 0 | 0 | 0 |
| 1781011668 | 3.54 V | 30 | 0 | 0 | 0 |
| 1781011551 | 3.55 V | 35 | 0 | 0 | 0 |
| 1781011434 | 3.54 V | 34 | 0 | 0 | 0 |
| 1781011317 | 3.53 V | 31 | 0 | 0 | 0 |
| 1781011200 | 3.55 V | 33 | 0 | 0 | 0 |
| 1781011083 | 3.54 V | 31 | 0 | 0 | 0 |
| 1781010966 | 3.53 V | 32 | 0 | 0 | 0 |
| 1781010849 | 3.32 V | 29 | 0 | 0 | 0 |
| 1781010733 | 3.55 V | 28 | 0 | 0 | 0 |
| 1781010615 | 3.57 V | 28 | 0 | 0 | 0 |
| 1781010498 | 3.55 V | 25 | 0 | 0 | 0 |
| 1781010381 | 3.55 V | 22 | 0 | 0 | 0 |
| 1780985889 | 3.62 V | 17 | 0 | 0 | 0 |
| 1780985655 | 3.66 V | 23 | 0 | 0 | 0 |
| 1780984718 | 3.46 V | 25 | 0 | 0 | 0 |
| 1780982725 | 3.71 V | 27 | 0 | 0 | 0 |
| 1780981204 | 3.73 V | 31 | 0 | 0 | 0 |
| 1780981087 | 3.74 V | 30 | 0 | 0 | 0 |
| 1780980970 | 3.73 V | 30 | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0.01
Satellite: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)