This is the latest recevied telemetry packets stored in our database for station/object OR7F-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1760496475 | 14 | 1214 | 3217 | 72 | 0 |
| 1760485183 | 15 | 1214 | 3236 | 72 | 0 |
| 1760482606 | 14 | 1214 | 3237 | 72 | 0 |
| 1760477933 | 17 | 1214 | 3253 | 72 | 0 |
| 1760477277 | 12 | 1214 | 3255 | 72 | 0 |
| 1760476974 | 12 | 1214 | 3256 | 72 | 0 |
| 1760476348 | 16 | 1214 | 3258 | 72 | 0 |
| 1760475135 | 16 | 1216 | 3265 | 72 | 0 |
| 1760474828 | 17 | 1214 | 3266 | 72 | 0 |
| 1760474525 | 17 | 1216 | 3268 | 72 | 0 |
| 1760473550 | 12 | 1214 | 3275 | 72 | 0 |
| 1760471068 | 11 | 1214 | 3297 | 72 | 0 |
| 1760469163 | 14 | 1216 | 3317 | 72 | 0 |
| 1760468860 | 9 | 1216 | 3321 | 72 | 0 |
| 1760465149 | 14 | 1214 | 3365 | 72 | 0 |
| 1760464219 | 13 | 1216 | 3378 | 72 | 0 |
| 1760461725 | 11 | 1214 | 3419 | 72 | 0 |
| 1760461119 | 9 | 1214 | 3429 | 72 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)