This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1767313713 | 91 Count | 399 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767311921 | 85 Count | 369 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767310112 | 78 Count | 332 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767308311 | 72 Count | 301 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767306511 | 66 Count | 270 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767304710 | 59 Count | 241 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767302909 | 52 Count | 215 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1767299308 | 38 Count | 146 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767295722 | 21 Count | 82 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767293922 | 14 Count | 51 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767292120 | 6 Count | 24 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767288519 | 167 Count | 999 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1767286718 | 157 Count | 970 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767284918 | 151 Count | 893 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767283117 | 144 Count | 861 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767281316 | 137 Count | 817 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767279516 | 130 Count | 777 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767277715 | 121 Count | 738 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767275914 | 115 Count | 709 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767274113 | 106 Count | 670 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767272313 | 98 Count | 637 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767270512 | 89 Count | 604 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767268712 | 83 Count | 580 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767266911 | 76 Count | 534 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767265110 | 71 Count | 499 Count | 0 Count | 3.98 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)