This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788999325 | 21 Count | 329 Count | 0 Count | 4 VDC | 0 VDC |
| 1788997525 | 17 Count | 272 Count | 0 Count | 4 VDC | 0 VDC |
| 1788995724 | 13 Count | 224 Count | 0 Count | 4 VDC | 0 VDC |
| 1788993923 | 9 Count | 152 Count | 0 Count | 4 VDC | 0 VDC |
| 1788992122 | 3 Count | 74 Count | 0 Count | 4 VDC | 0 VDC |
| 1788990321 | 99 Count | 1084 Count | 0 Count | 4 VDC | 0 VDC |
| 1788986775 | 87 Count | 929 Count | 0 Count | 4 VDC | 0 VDC |
| 1788984964 | 83 Count | 867 Count | 0 Count | 4 VDC | 0 VDC |
| 1788983155 | 79 Count | 803 Count | 0 Count | 4 VDC | 0 VDC |
| 1788981354 | 75 Count | 750 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1788979553 | 71 Count | 700 Count | 0 Count | 4 VDC | 0 VDC |
| 1788977753 | 65 Count | 642 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1788975952 | 61 Count | 590 Count | 0 Count | 4 VDC | 0 VDC |
| 1788974151 | 57 Count | 542 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1788972350 | 53 Count | 490 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1788970549 | 48 Count | 446 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1788968749 | 40 Count | 408 Count | 0 Count | 4 VDC | 0 VDC |
| 1788966938 | 35 Count | 372 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1788965137 | 27 Count | 334 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1788963337 | 21 Count | 297 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1788961536 | 17 Count | 231 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1788959735 | 12 Count | 169 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1788957934 | 8 Count | 106 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1788956134 | 3 Count | 48 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1788954323 | 66 Count | 1018 Count | 0 Count | 4.02 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)