This is the latest recevied telemetry packets stored in our database for station/object IU4BUQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1760123356 | 292 Count | 0 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1760122753 | 291 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1760122150 | 290 Count | 0 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1760121547 | 289 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1760120945 | 288 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1760120342 | 287 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1760119739 | 286 Count | 0 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1760119136 | 285 Count | 0 Count | 0 Count | 4.16 VDC | 0.14 VDC |
| 1760118505 | 284 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1760117902 | 283 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1760117399 | 282 Count | 0 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1760116796 | 281 Count | 0 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1760116193 | 280 Count | 0 Count | 0 Count | 4.16 VDC | 0.14 VDC |
| 1760115591 | 279 Count | 0 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1760114988 | 278 Count | 0 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1760114385 | 277 Count | 0 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1760113782 | 276 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1760113179 | 275 Count | 0 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1760112577 | 274 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1760111974 | 273 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1760111371 | 272 Count | 0 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1760110768 | 271 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1760110165 | 270 Count | 0 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1760109563 | 269 Count | 0 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1760108960 | 268 Count | 0 Count | 0 Count | 4.2 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)