This is the latest recevied telemetry packets stored in our database for station/object CE3TDM-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1773328890 | 4.13 VDC | 30.8 C | 38.98 % | 1027.88 hPa | 0 |
| 1773328766 | 4.13 VDC | 31.5 C | 38.08 % | 1029.5 hPa | 0 |
| 1773306697 | 4.15 VDC | 30 C | 37.7 % | 1022.25 hPa | 0 |
| 1773305793 | 4.16 VDC | 29.8 C | 38.22 % | 1022.75 hPa | 0 |
| 1773304890 | 4.19 VDC | 29 C | 38.81 % | 1022.5 hPa | 0 |
| 1773304672 | 4.19 VDC | 29 C | 38.78 % | 1034.38 hPa | 0 |
| 1773304230 | 4.19 VDC | 29 C | 38.97 % | 1023 hPa | 0 |
| 1773303325 | 4.19 VDC | 29.1 C | 38.38 % | 1023 hPa | 0 |
| 1773302423 | 4.19 VDC | 29.2 C | 38.53 % | 1022.88 hPa | 0 |
| 1773301517 | 4.19 VDC | 29.2 C | 38.38 % | 1020.75 hPa | 0 |
| 1773301201 | 4.19 VDC | 29.2 C | 38.99 % | 1025.5 hPa | 0 |
| 1773300650 | 4.19 VDC | 29.3 C | 38.49 % | 1020.25 hPa | 0 |
| 1773300600 | 4.19 VDC | 29.2 C | 38.65 % | 1020.13 hPa | 0 |
| 1773300112 | 4.19 VDC | 29.3 C | 38.27 % | 1024.38 hPa | 0 |
| 1773299209 | 4.19 VDC | 29.5 C | 37.64 % | 1023.63 hPa | 0 |
| 1773298306 | 4.21 VDC | 29.8 C | 37.23 % | 1020.5 hPa | 0 |
| 1773297400 | 4.21 VDC | 30 C | 36.99 % | 1022.5 hPa | 0 |
| 1773296497 | 4.21 VDC | 30.3 C | 36.71 % | 1023.75 hPa | 0 |
| 1773295592 | 4.21 VDC | 30.7 C | 36.25 % | 1023.75 hPa | 0 |
| 1773295046 | 4.21 VDC | 30.9 C | 35.91 % | 1025.13 hPa | 0 |
| 1773294142 | 4.21 VDC | 31.4 C | 35.39 % | 1023.75 hPa | 0 |
| 1773293959 | 4.21 VDC | 31.5 C | 35.39 % | 1024 hPa | 0 |
| 1773293176 | 4.21 VDC | 31.8 C | 34.95 % | 1021.75 hPa | 0 |
| 1773293049 | 4.21 VDC | 31.8 C | 34.76 % | 1022.38 hPa | 0 |
| 1773290204 | 4.12 VDC | 32.1 C | 34.02 % | 1023.5 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)