This is the latest recevied telemetry packets stored in our database for station/object IZ8QAD-F. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1760103283 | 3.87 VDC | 20.2 C | 38.77 % | 1012.38 hPa | 0 |
| 1760100380 | 3.91 VDC | 20.7 C | 40.48 % | 1012.63 hPa | 0 |
| 1760091480 | 3.98 VDC | 22 C | 31.07 % | 1032.13 hPa | 0 |
| 1760090834 | 4 VDC | 33.2 C | 18.91 % | 1032.88 hPa | 0 |
| 1760090551 | 4.01 VDC | 33 C | 18.85 % | 1032 hPa | 0 |
| 1760089958 | 4.01 VDC | 33.3 C | 19.01 % | 1029.63 hPa | 0 |
| 1760089686 | 4.01 VDC | 31.7 C | 21.92 % | 1030.63 hPa | 0 |
| 1760089045 | 4.02 VDC | 31.7 C | 21.71 % | 1029.5 hPa | 0 |
| 1760088721 | 4.02 VDC | 31.8 C | 22.13 % | 1025 hPa | 0 |
| 1760086373 | 4.03 VDC | 29.9 C | 25.62 % | 1026.75 hPa | 0 |
| 1760085929 | 4.03 VDC | 28.2 C | 29.23 % | 1028.5 hPa | 0 |
| 1760085570 | 4.03 VDC | 28.1 C | 28.2 % | 1026.63 hPa | 0 |
| 1760085195 | 4.03 VDC | 23.9 C | 39.06 % | 1028.38 hPa | 0 |
| 1760083688 | 4.04 VDC | 18.8 C | 53.66 % | 986 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)