This is the latest recevied telemetry packets stored in our database for station/object EB5BZM-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773204947 | 0 Count | 432 Count | 0 Count | 0 VDC | 0 VDC |
| 1773202906 | 0 Count | 431 Count | 0 Count | 0 VDC | 0 VDC |
| 1773200865 | 0 Count | 431 Count | 0 Count | 0 VDC | 0 VDC |
| 1773199673 | 0 Count | 430 Count | 0 Count | 0 VDC | 0 VDC |
| 1773197632 | 0 Count | 429 Count | 0 Count | 0 VDC | 0 VDC |
| 1773195591 | 0 Count | 429 Count | 0 Count | 0 VDC | 0 VDC |
| 1773193551 | 0 Count | 428 Count | 0 Count | 0 VDC | 0 VDC |
| 1773191510 | 0 Count | 426 Count | 0 Count | 0 VDC | 0 VDC |
| 1773189468 | 0 Count | 425 Count | 0 Count | 0 VDC | 0 VDC |
| 1773187428 | 0 Count | 425 Count | 0 Count | 0 VDC | 0 VDC |
| 1773185387 | 0 Count | 424 Count | 0 Count | 0 VDC | 0 VDC |
| 1773183346 | 0 Count | 423 Count | 0 Count | 0 VDC | 0 VDC |
| 1773181305 | 0 Count | 422 Count | 0 Count | 0 VDC | 0 VDC |
| 1773179264 | 0 Count | 422 Count | 0 Count | 0 VDC | 0 VDC |
| 1773178073 | 0 Count | 421 Count | 0 Count | 0 VDC | 0 VDC |
| 1773176033 | 0 Count | 420 Count | 0 Count | 0 VDC | 0 VDC |
| 1773173991 | 0 Count | 420 Count | 0 Count | 0 VDC | 0 VDC |
| 1773171950 | 0 Count | 419 Count | 0 Count | 0 VDC | 0 VDC |
| 1773169909 | 0 Count | 417 Count | 0 Count | 0 VDC | 0 VDC |
| 1773167869 | 0 Count | 416 Count | 0 Count | 0 VDC | 0 VDC |
| 1773165827 | 0 Count | 401 Count | 0 Count | 0 VDC | 0 VDC |
| 1773163787 | 0 Count | 380 Count | 0 Count | 0 VDC | 0 VDC |
| 1773161746 | 0 Count | 345 Count | 0 Count | 0 VDC | 0 VDC |
| 1773159705 | 0 Count | 332 Count | 0 Count | 0 VDC | 0 VDC |
| 1773157664 | 0 Count | 322 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)