This is the latest recevied telemetry packets stored in our database for station/object IU1VDW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789234322 | 0 Count | 960 Count | 0 Count | 0 VDC | 0 VDC |
| 1789233421 | 0 Count | 953 Count | 0 Count | 0 VDC | 0 VDC |
| 1789232520 | 0 Count | 932 Count | 0 Count | 0 VDC | 0 VDC |
| 1789231620 | 0 Count | 918 Count | 0 Count | 0 VDC | 0 VDC |
| 1789230720 | 0 Count | 913 Count | 0 Count | 0 VDC | 0 VDC |
| 1789229819 | 0 Count | 909 Count | 0 Count | 0 VDC | 0 VDC |
| 1789228919 | 0 Count | 905 Count | 0 Count | 0 VDC | 0 VDC |
| 1789228019 | 0 Count | 903 Count | 0 Count | 0 VDC | 0 VDC |
| 1789227118 | 0 Count | 903 Count | 0 Count | 0 VDC | 0 VDC |
| 1789226217 | 0 Count | 891 Count | 0 Count | 0 VDC | 0 VDC |
| 1789225317 | 0 Count | 867 Count | 0 Count | 0 VDC | 0 VDC |
| 1789224417 | 0 Count | 836 Count | 0 Count | 0 VDC | 0 VDC |
| 1789223519 | 0 Count | 825 Count | 0 Count | 0 VDC | 0 VDC |
| 1789222619 | 0 Count | 813 Count | 0 Count | 0 VDC | 0 VDC |
| 1789221718 | 0 Count | 806 Count | 0 Count | 0 VDC | 0 VDC |
| 1789220818 | 0 Count | 800 Count | 0 Count | 0 VDC | 0 VDC |
| 1789219918 | 0 Count | 796 Count | 0 Count | 0 VDC | 0 VDC |
| 1789219018 | 0 Count | 786 Count | 0 Count | 0 VDC | 0 VDC |
| 1789218118 | 0 Count | 783 Count | 0 Count | 0 VDC | 0 VDC |
| 1789217218 | 0 Count | 781 Count | 0 Count | 0 VDC | 0 VDC |
| 1789216318 | 0 Count | 781 Count | 0 Count | 0 VDC | 0 VDC |
| 1789215418 | 0 Count | 778 Count | 0 Count | 0 VDC | 0 VDC |
| 1789214517 | 0 Count | 772 Count | 0 Count | 0 VDC | 0 VDC |
| 1789213617 | 0 Count | 769 Count | 0 Count | 0 VDC | 0 VDC |
| 1789212717 | 0 Count | 768 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)