This is the latest recevied telemetry packets stored in our database for station/object ON3RIP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789220429 | 138 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789219525 | 121 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789218622 | 105 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789217718 | 82 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789216815 | 65 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789215911 | 47 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789215008 | 32 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789214104 | 15 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789213200 | 1003 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789212297 | 987 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789211393 | 971 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789210488 | 953 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789209584 | 937 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789208681 | 919 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789207778 | 904 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789206875 | 887 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789205971 | 872 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789205148 | 857 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789204245 | 842 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789203341 | 825 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789202438 | 810 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789201534 | 791 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789200631 | 776 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789199728 | 758 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1789198825 | 741 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)