This is the latest recevied telemetry packets stored in our database for station/object W9EN-44. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1777881723 | 4.1 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777880823 | 4.09 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777879923 | 4.1 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777879023 | 4.1 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777878123 | 4.1 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777877222 | 4.09 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777876322 | 4.1 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777875422 | 4.1 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777874522 | 4.11 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777873621 | 4.1 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777872721 | 4.11 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777871821 | 4.11 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777870921 | 4.11 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777870021 | 4.11 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777869121 | 4.11 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777868220 | 4.11 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777867320 | 4.11 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777866420 | 4.11 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777865520 | 4.12 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777864620 | 4.12 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777863720 | 4.12 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1777862819 | 4.12 VDC | 1.38 VDC | 0 | 0 | 0 |
| 1777861919 | 4.12 VDC | 4.2 VDC | 0 | 0 | 0 |
| 1777861019 | 4.13 VDC | 4.76 VDC | 0 | 0 | 0 |
| 1777860119 | 4.13 VDC | 13.72 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)