EA2RCF LoRa APRS MAP

My position About Go to BACKUP map Powered by EA2RCF Radioclub Foronda ☰

reset

HS9BZG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS9BZG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TEMP*	HUM*	BAR*	BAT*
1760066743	33.05 °C	44.8 %RH	991.1 hPa	4.34 V
1760066143	32.88 °C	45.2 %RH	991.1 hPa	4.34 V
1760065543	32.8 °C	45.4 %RH	991.2 hPa	4.34 V
1760064943	32.54 °C	45.7 %RH	991 hPa	4.34 V
1760064343	32.38 °C	46.1 %RH	991 hPa	4.34 V
1760063743	32.09 °C	46.5 %RH	991.1 hPa	4.34 V
1760063143	31.92 °C	47 %RH	991.1 hPa	4.33 V
1760062543	31.79 °C	47.2 %RH	991.1 hPa	4.33 V
1760061943	31.62 °C	47.4 %RH	991.1 hPa	4.34 V
1760061343	31.46 °C	47.9 %RH	991.1 hPa	4.33 V
1760060743	31.31 °C	48.3 %RH	991 hPa	4.34 V
1760060363	31.2 °C	48.6 %RH	990.8 hPa	4.33 V
1760059543	31.18 °C	48.8 %RH	990.8 hPa	4.34 V
1760058943	31 °C	49.4 %RH	990.8 hPa	4.34 V
1760058343	31.06 °C	50 %RH	990.9 hPa	4.33 V
1760057773	31.16 °C	49.9 %RH	990.9 hPa	4.34 V
1760057173	31.1 °C	50 %RH	990.9 hPa	4.34 V
1760056573	31.13 °C	50.2 %RH	990.7 hPa	4.33 V
1760055973	31.18 °C	50.4 %RH	990.5 hPa	4.33 V
1760055373	31.35 °C	50.5 %RH	990.2 hPa	4.34 V
1760054773	31.81 °C	50.4 %RH	990 hPa	4.34 V
1760054409	32.25 °C	50.1 %RH	990.1 hPa	4.34 V
1760053809	32.27 °C	50.6 %RH	990 hPa	4.18 V
1759990664	33.3 °C	43.6 %RH	989.5 hPa	4.16 V
1759989729	33.68 °C	43.4 %RH	989.9 hPa	4.21 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)