This is the latest recevied telemetry packets stored in our database for station/object SP3KON-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1763996756 | 12 Count | 23 Count | 10 Count | 4.39 VDC | 0 VDC |
| 1763995855 | 6 Count | 13 Count | 5 Count | 4.38 VDC | 0 VDC |
| 1763994954 | 0 Count | 0 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1763994069 | 488 Count | 989 Count | 366 Count | 4.4 VDC | 0 VDC |
| 1763993168 | 482 Count | 979 Count | 361 Count | 4.3 VDC | 0 VDC |
| 1763992268 | 476 Count | 965 Count | 356 Count | 4.4 VDC | 0 VDC |
| 1763991367 | 471 Count | 955 Count | 352 Count | 4.38 VDC | 0 VDC |
| 1763990466 | 465 Count | 945 Count | 347 Count | 4.36 VDC | 0 VDC |
| 1763989565 | 460 Count | 934 Count | 343 Count | 4.31 VDC | 0 VDC |
| 1763988665 | 453 Count | 921 Count | 337 Count | 4.36 VDC | 0 VDC |
| 1763987764 | 443 Count | 901 Count | 328 Count | 4.35 VDC | 0 VDC |
| 1763986863 | 437 Count | 890 Count | 323 Count | 4.34 VDC | 0 VDC |
| 1763985962 | 433 Count | 883 Count | 320 Count | 4.32 VDC | 0 VDC |
| 1763985062 | 428 Count | 875 Count | 316 Count | 4.37 VDC | 0 VDC |
| 1763984161 | 424 Count | 869 Count | 313 Count | 4.38 VDC | 0 VDC |
| 1763983260 | 419 Count | 860 Count | 309 Count | 4.34 VDC | 0 VDC |
| 1763982360 | 415 Count | 854 Count | 306 Count | 4.32 VDC | 0 VDC |
| 1763981459 | 411 Count | 846 Count | 303 Count | 4.3 VDC | 0 VDC |
| 1763980558 | 407 Count | 839 Count | 300 Count | 4.39 VDC | 0 VDC |
| 1763979657 | 402 Count | 830 Count | 296 Count | 4.38 VDC | 0 VDC |
| 1763978756 | 398 Count | 824 Count | 293 Count | 4.39 VDC | 0 VDC |
| 1763977856 | 393 Count | 814 Count | 289 Count | 4.37 VDC | 0 VDC |
| 1763976955 | 387 Count | 802 Count | 284 Count | 4.38 VDC | 0 VDC |
| 1763976054 | 380 Count | 791 Count | 278 Count | 4.36 VDC | 0 VDC |
| 1763975154 | 375 Count | 784 Count | 274 Count | 4.36 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)