EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

HS9BZG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS9BZG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	TEMP*	HUM*	BAR*	BAT*	CPU*
1783380573	33.49 °C	52.2 %RH	990.5 hPa	4.2 V	48.9 °C
1783379973	33.42 °C	52.3 %RH	990.5 hPa	4.2 V	48.9 °C
1783379373	33.09 °C	52.9 %RH	990.5 hPa	4.2 V	47.9 °C
1783378773	32.73 °C	53.1 %RH	990.5 hPa	4.13 V	47.9 °C
1783378173	33.15 °C	52.3 %RH	990.3 hPa	4.15 V	47.9 °C
1783377573	33.29 °C	52.1 %RH	990.2 hPa	4.2 V	47.9 °C
1783376973	33.33 °C	52 %RH	990.1 hPa	4.2 V	47.9 °C
1783376373	33.35 °C	51.9 %RH	990.1 hPa	4.2 V	47.9 °C
1783375773	33.36 °C	51.8 %RH	990 hPa	4.2 V	47.9 °C
1783375173	33.39 °C	51.7 %RH	990 hPa	4.2 V	47.9 °C
1783374573	33.42 °C	51.6 %RH	990 hPa	4.2 V	47.9 °C
1783373973	33.4 °C	51.5 %RH	990 hPa	4.2 V	47.9 °C
1783373373	33.51 °C	51.3 %RH	989.9 hPa	4.2 V	47.9 °C
1783372773	33.56 °C	51.1 %RH	989.8 hPa	4.2 V	48.9 °C
1783372173	33.59 °C	51 %RH	989.7 hPa	4.2 V	48.9 °C
1783371573	33.62 °C	51 %RH	989.7 hPa	4.2 V	48.9 °C
1783370973	33.42 °C	51.3 %RH	989.8 hPa	4.2 V	47.9 °C
1783370373	33.1 °C	51.5 %RH	989.8 hPa	4.12 V	47.9 °C

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

CPU: 0, 0.01, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)