This is the latest recevied telemetry packets stored in our database for station/object DG1KWA-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1746815730 | 4.04 | 0 | 0 | 0 | 0 |
| 1746815506 | 4.04 | 0 | 0 | 0 | 0 |
| 1746815343 | 4.03 | 0 | 0 | 0 | 0 |
| 1746815220 | 4.04 | 0 | 0 | 0 | 0 |
| 1746814945 | 4.04 | 0 | 0 | 0 | 0 |
| 1746813394 | 4.04 | 0 | 0 | 0 | 0 |
| 1746813271 | 4.04 | 0 | 0 | 0 | 0 |
| 1746813246 | 4.04 | 0 | 0 | 0 | 0 |
| 1746813192 | 4.04 | 0 | 0 | 0 | 0 |
| 1746813057 | 4.04 | 0 | 0 | 0 | 0 |
| 1746812934 | 4.04 | 0 | 0 | 0 | 0 |
| 1746812912 | 4.04 | 0 | 0 | 0 | 0 |
| 1746812817 | 4.04 | 0 | 0 | 0 | 0 |
| 1746812715 | 4.04 | 0 | 0 | 0 | 0 |
| 1746812628 | 4.04 | 0 | 0 | 0 | 0 |
| 1746812563 | 4.04 | 0 | 0 | 0 | 0 |
| 1746812440 | 4.04 | 0 | 0 | 0 | 0 |
| 1746812190 | 4.03 | 0 | 0 | 0 | 0 |
| 1746811729 | 4.04 | 0 | 0 | 0 | 0 |
| 1746811666 | 4.04 | 0 | 0 | 0 | 0 |
| 1746811542 | 4.04 | 0 | 0 | 0 | 0 |
| 1746811419 | 4.04 | 0 | 0 | 0 | 0 |
| 1746811396 | 4.04 | 0 | 0 | 0 | 0 |
| 1746811374 | 4.04 | 0 | 0 | 0 | 0 |
| 1746811240 | 4.04 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)