This is the latest recevied telemetry packets stored in our database for station/object IK4NOW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1761101676 | 3 Pkt/10m | 3 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761100472 | 3 Pkt/10m | 3 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1761099268 | 4 Pkt/10m | 4 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1761098064 | 3 Pkt/10m | 3 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761096861 | 2 Pkt/10m | 2 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761095657 | 6 Pkt/10m | 6 Pkt/10m | 3.74 Volt | 0 | 0 |
| 1761094453 | 3 Pkt/10m | 3 Pkt/10m | 3.74 Volt | 0 | 0 |
| 1761093250 | 2 Pkt/10m | 2 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1761092045 | 4 Pkt/10m | 4 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761090841 | 2 Pkt/10m | 2 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1761089637 | 2 Pkt/10m | 2 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761088433 | 5 Pkt/10m | 5 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761087229 | 15 Pkt/10m | 15 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761086025 | 13 Pkt/10m | 13 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761084821 | 4 Pkt/10m | 4 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761083618 | 2 Pkt/10m | 2 Pkt/10m | 3.74 Volt | 0 | 0 |
| 1761082414 | 3 Pkt/10m | 3 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761081210 | 5 Pkt/10m | 5 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761080006 | 2 Pkt/10m | 2 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761078802 | 2 Pkt/10m | 2 Pkt/10m | 3.74 Volt | 0 | 0 |
| 1761077598 | 4 Pkt/10m | 4 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761076394 | 3 Pkt/10m | 3 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761075190 | 1 Pkt/10m | 1 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761073986 | 3 Pkt/10m | 3 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1761072782 | 2 Pkt/10m | 2 Pkt/10m | 3.76 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)