This is the latest recevied telemetry packets stored in our database for station/object LZ4NY-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satellite* | Battery* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1746256400 | 9 ' | 3.86 V | 0 | 0 | 0 |
| 1746256386 | 8 ' | 3.87 V | 0 | 0 | 0 |
| 1746253705 | 9 ' | 3.94 V | 0 | 0 | 0 |
| 1746253683 | 8 ' | 3.93 V | 0 | 0 | 0 |
| 1746253355 | 9 ' | 3.95 V | 0 | 0 | 0 |
| 1746253332 | 9 ' | 3.94 V | 0 | 0 | 0 |
| 1746253310 | 10 ' | 3.94 V | 0 | 0 | 0 |
| 1746253287 | 10 ' | 3.95 V | 0 | 0 | 0 |
| 1746253264 | 10 ' | 3.94 V | 0 | 0 | 0 |
| 1746253217 | 10 ' | 3.95 V | 0 | 0 | 0 |
| 1746252619 | 9 ' | 3.97 V | 0 | 0 | 0 |
| 1746252521 | 8 ' | 3.97 V | 0 | 0 | 0 |
| 1746252474 | 8 ' | 3.92 V | 0 | 0 | 0 |
| 1746252448 | 8 ' | 3.97 V | 0 | 0 | 0 |
| 1746252425 | 8 ' | 3.97 V | 0 | 0 | 0 |
| 1746252403 | 8 ' | 3.97 V | 0 | 0 | 0 |
| 1746252333 | 8 ' | 3.97 V | 0 | 0 | 0 |
| 1746252302 | 7 ' | 3.97 V | 0 | 0 | 0 |
| 1746252280 | 7 ' | 3.89 V | 0 | 0 | 0 |
| 1746252272 | 7 ' | 3.97 V | 0 | 0 | 0 |
| 1746252252 | 7 ' | 3.9 V | 0 | 0 | 0 |
| 1746252241 | 8 ' | 3.97 V | 0 | 0 | 0 |
| 1746252223 | 8 ' | 3.97 V | 0 | 0 | 0 |
| 1746252200 | 8 ' | 3.98 V | 0 | 0 | 0 |
| 1746252178 | 8 ' | 3.98 V | 0 | 0 | 0 |
*Used Equation Coefficients:
Satellite: 0, 1, 0
Battery: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)