This is the latest recevied telemetry packets stored in our database for station/object SP2WIT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1746019673 | 23 Count | 0 Count | 0 Count | 4.14 VDC | 5.82 VDC |
| 1746017878 | 22 Count | 0 Count | 0 Count | 4.14 VDC | 5.82 VDC |
| 1746016085 | 21 Count | 0 Count | 0 Count | 4.14 VDC | 5.82 VDC |
| 1746014285 | 20 Count | 0 Count | 0 Count | 4.14 VDC | 5.82 VDC |
| 1746012488 | 19 Count | 0 Count | 0 Count | 4.14 VDC | 5.82 VDC |
| 1746010690 | 18 Count | 0 Count | 0 Count | 4.14 VDC | 5.82 VDC |
| 1746008895 | 17 Count | 0 Count | 0 Count | 4.14 VDC | 5.82 VDC |
| 1746007098 | 16 Count | 0 Count | 0 Count | 4.14 VDC | 5.8 VDC |
| 1746005296 | 10 Count | 0 Count | 0 Count | 4.14 VDC | 5.8 VDC |
| 1746003495 | 9 Count | 0 Count | 0 Count | 4.14 VDC | 5.8 VDC |
| 1746001699 | 8 Count | 0 Count | 0 Count | 4.15 VDC | 5.8 VDC |
| 1745999901 | 7 Count | 0 Count | 0 Count | 4.14 VDC | 5.78 VDC |
| 1745998101 | 6 Count | 0 Count | 0 Count | 4.14 VDC | 5.78 VDC |
| 1745994503 | 4 Count | 0 Count | 0 Count | 4.14 VDC | 5.78 VDC |
| 1745992707 | 3 Count | 0 Count | 0 Count | 4.14 VDC | 5.76 VDC |
| 1745990911 | 2 Count | 0 Count | 0 Count | 4.15 VDC | 5.76 VDC |
| 1745989112 | 1 Count | 0 Count | 0 Count | 4.14 VDC | 4.68 VDC |
| 1745987311 | 0 Count | 0 Count | 0 Count | 4.14 VDC | 4.68 VDC |
| 1745985513 | 108 Count | 1005 Count | 0 Count | 4.13 VDC | 4.66 VDC |
| 1745983714 | 107 Count | 992 Count | 0 Count | 4.13 VDC | 4.12 VDC |
| 1745981916 | 106 Count | 985 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1745980124 | 105 Count | 985 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1745978325 | 104 Count | 985 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1745976530 | 103 Count | 985 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1745974737 | 102 Count | 985 Count | 0 Count | 4.13 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)