This is the latest recevied telemetry packets stored in our database for station/object SQ8BS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762369086 | 0 Count | 30 Count | 0 Count | 4.39 VDC | 0 VDC |
| 1762368785 | 0 Count | 30 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1762368485 | 0 Count | 30 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1762368185 | 0 Count | 30 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1762367885 | 0 Count | 29 Count | 0 Count | 4.48 VDC | 0 VDC |
| 1762367585 | 0 Count | 29 Count | 0 Count | 4.53 VDC | 0 VDC |
| 1762367285 | 0 Count | 29 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1762366985 | 0 Count | 28 Count | 0 Count | 4.46 VDC | 0 VDC |
| 1762366685 | 0 Count | 27 Count | 0 Count | 4.42 VDC | 0 VDC |
| 1762366384 | 0 Count | 27 Count | 0 Count | 4.48 VDC | 0 VDC |
| 1762366084 | 0 Count | 27 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1762365784 | 0 Count | 27 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1762365484 | 0 Count | 27 Count | 0 Count | 4.42 VDC | 0 VDC |
| 1762365184 | 0 Count | 27 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1762364884 | 0 Count | 26 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1762364584 | 0 Count | 26 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1762364284 | 0 Count | 26 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1762363984 | 0 Count | 26 Count | 0 Count | 4.53 VDC | 0 VDC |
| 1762363683 | 0 Count | 26 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1762363383 | 0 Count | 26 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1762363083 | 0 Count | 26 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1762362783 | 0 Count | 26 Count | 0 Count | 4.48 VDC | 0 VDC |
| 1762362483 | 0 Count | 26 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1762362183 | 0 Count | 26 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1762361883 | 0 Count | 26 Count | 0 Count | 4.48 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)