This is the latest recevied telemetry packets stored in our database for station/object SQ8BS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773727887 | 0 Count | 773 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1773727587 | 0 Count | 760 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1773727287 | 0 Count | 750 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1773726987 | 0 Count | 738 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1773726687 | 0 Count | 725 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1773726387 | 0 Count | 715 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1773726087 | 0 Count | 705 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1773725792 | 0 Count | 693 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1773725492 | 0 Count | 683 Count | 0 Count | 4.41 VDC | 0 VDC |
| 1773725192 | 0 Count | 670 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1773724892 | 0 Count | 662 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1773724592 | 0 Count | 650 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1773724292 | 0 Count | 639 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1773723991 | 0 Count | 629 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1773723691 | 0 Count | 623 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1773723391 | 0 Count | 612 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1773723091 | 0 Count | 600 Count | 0 Count | 4.39 VDC | 0 VDC |
| 1773722791 | 0 Count | 592 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1773722491 | 0 Count | 582 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1773722191 | 0 Count | 567 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1773721891 | 0 Count | 551 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1773721591 | 0 Count | 541 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1773721291 | 0 Count | 530 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1773720991 | 0 Count | 519 Count | 0 Count | 4.46 VDC | 0 VDC |
| 1773720691 | 0 Count | 508 Count | 0 Count | 4.51 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)