This is the latest recevied telemetry packets stored in our database for station/object SQ8BS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782616438 | 0 Count | 884 Count | 0 Count | 4.49 VDC | 0 VDC |
| 1782616137 | 0 Count | 879 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1782615837 | 0 Count | 872 Count | 0 Count | 4.5 VDC | 0 VDC |
| 1782615537 | 0 Count | 871 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1782615242 | 0 Count | 864 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1782614942 | 0 Count | 859 Count | 0 Count | 4.43 VDC | 0 VDC |
| 1782614642 | 0 Count | 857 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1782614342 | 0 Count | 851 Count | 0 Count | 4.41 VDC | 0 VDC |
| 1782614042 | 0 Count | 841 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1782613742 | 0 Count | 840 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1782613442 | 0 Count | 837 Count | 0 Count | 4.41 VDC | 0 VDC |
| 1782613141 | 0 Count | 831 Count | 0 Count | 4.5 VDC | 0 VDC |
| 1782612841 | 0 Count | 827 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1782612541 | 0 Count | 822 Count | 0 Count | 4.5 VDC | 0 VDC |
| 1782612241 | 0 Count | 816 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1782611941 | 0 Count | 814 Count | 0 Count | 4.5 VDC | 0 VDC |
| 1782611641 | 0 Count | 809 Count | 0 Count | 4.49 VDC | 0 VDC |
| 1782611341 | 0 Count | 804 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1782611041 | 0 Count | 802 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1782610741 | 0 Count | 799 Count | 0 Count | 4.5 VDC | 0 VDC |
| 1782610441 | 0 Count | 791 Count | 0 Count | 4.41 VDC | 0 VDC |
| 1782610141 | 0 Count | 789 Count | 0 Count | 4.45 VDC | 0 VDC |
| 1782609841 | 0 Count | 786 Count | 0 Count | 4.5 VDC | 0 VDC |
| 1782609540 | 0 Count | 778 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1782609240 | 0 Count | 773 Count | 0 Count | 4.5 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)