This is the latest recevied telemetry packets stored in our database for station/object UB0JBX-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | OnlineCnt* | NodesCnt* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753293742 | 12 | 104 | 0 | 0 | 0 |
| 1753293022 | 10 | 104 | 0 | 0 | 0 |
| 1753292281 | 9 | 103 | 0 | 0 | 0 |
| 1753291561 | 8 | 103 | 0 | 0 | 0 |
| 1753290841 | 8 | 103 | 0 | 0 | 0 |
| 1753290121 | 8 | 103 | 0 | 0 | 0 |
| 1753289400 | 12 | 103 | 0 | 0 | 0 |
| 1753288679 | 11 | 103 | 0 | 0 | 0 |
| 1753287959 | 11 | 103 | 0 | 0 | 0 |
| 1753287238 | 10 | 103 | 0 | 0 | 0 |
| 1753286517 | 10 | 103 | 0 | 0 | 0 |
| 1753285797 | 9 | 103 | 0 | 0 | 0 |
| 1753285077 | 9 | 103 | 0 | 0 | 0 |
| 1753284356 | 10 | 103 | 0 | 0 | 0 |
| 1753283636 | 10 | 103 | 0 | 0 | 0 |
| 1753282916 | 9 | 103 | 0 | 0 | 0 |
| 1753282195 | 10 | 103 | 0 | 0 | 0 |
| 1753281474 | 7 | 103 | 0 | 0 | 0 |
| 1753280754 | 8 | 103 | 0 | 0 | 0 |
| 1753280034 | 8 | 103 | 0 | 0 | 0 |
| 1753279313 | 9 | 103 | 0 | 0 | 0 |
| 1753278593 | 10 | 103 | 0 | 0 | 0 |
| 1753277872 | 10 | 103 | 0 | 0 | 0 |
| 1753277152 | 9 | 103 | 0 | 0 | 0 |
| 1753276431 | 9 | 103 | 0 | 0 | 0 |
*Used Equation Coefficients:
OnlineCnt: 0, 1, 0
NodesCnt: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)