This is the latest recevied telemetry packets stored in our database for station/object EA5KAO-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1760560363 | 3.13 VDC | 29 C | 52.62 % | 1019 hPa | 0 |
| 1760559460 | 3.45 VDC | 29 C | 53.34 % | 1022.38 hPa | 0 |
| 1760558557 | 3.59 VDC | 29 C | 52.96 % | 1018 hPa | 0 |
| 1760557654 | 3.67 VDC | 28.9 C | 53.37 % | 1019 hPa | 0 |
| 1760556751 | 3.72 VDC | 28.8 C | 53.05 % | 1019.75 hPa | 0 |
| 1760555848 | 3.73 VDC | 28.8 C | 52.86 % | 1018.88 hPa | 0 |
| 1760554945 | 3.74 VDC | 28.9 C | 52.89 % | 1017.88 hPa | 0 |
| 1760554042 | 3.75 VDC | 29.1 C | 52.32 % | 1019 hPa | 0 |
| 1760553139 | 3.76 VDC | 29.2 C | 51.63 % | 1019.88 hPa | 0 |
| 1760552236 | 3.78 VDC | 29.2 C | 51.96 % | 1019.63 hPa | 0 |
| 1760551333 | 3.79 VDC | 29.2 C | 51.5 % | 1019.25 hPa | 0 |
| 1760550430 | 3.8 VDC | 29.3 C | 51.51 % | 1018 hPa | 0 |
| 1760549529 | 3.81 VDC | 29.3 C | 51.41 % | 1018.25 hPa | 0 |
| 1760548626 | 3.82 VDC | 29.3 C | 51.17 % | 1022.63 hPa | 0 |
| 1760546818 | 3.84 VDC | 29.4 C | 49.96 % | 1017.5 hPa | 0 |
| 1760545915 | 3.85 VDC | 29.4 C | 49.84 % | 1017.13 hPa | 0 |
| 1760545011 | 3.85 VDC | 29.4 C | 49.01 % | 1017 hPa | 0 |
| 1760544109 | 3.86 VDC | 29.5 C | 48.75 % | 1018.13 hPa | 0 |
| 1760543206 | 3.87 VDC | 29.6 C | 50.1 % | 1017.13 hPa | 0 |
| 1760542303 | 3.87 VDC | 29.6 C | 49.64 % | 1016.25 hPa | 0 |
| 1760541400 | 3.88 VDC | 29.5 C | 49.81 % | 1017 hPa | 0 |
| 1760540497 | 3.89 VDC | 29.5 C | 49.47 % | 1015.5 hPa | 0 |
| 1760539594 | 3.9 VDC | 29.6 C | 49.61 % | 1018.13 hPa | 0 |
| 1760533273 | 3.96 VDC | 30 C | 51.31 % | 1017 hPa | 0 |
| 1760532370 | 3.97 VDC | 30 C | 51.5 % | 1017.88 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)