This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1757919046 | 73 Count | 525 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1757917243 | 72 Count | 518 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1757915440 | 71 Count | 511 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1757913638 | 70 Count | 499 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1757911835 | 69 Count | 492 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1757910032 | 68 Count | 485 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1757908263 | 63 Count | 476 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1757906460 | 62 Count | 469 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1757904657 | 61 Count | 462 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1757902854 | 60 Count | 455 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1757901051 | 59 Count | 448 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1757899248 | 58 Count | 441 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1757897445 | 57 Count | 434 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1757895642 | 56 Count | 427 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1757893839 | 55 Count | 420 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1757892037 | 54 Count | 400 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1757890234 | 53 Count | 393 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1757888431 | 52 Count | 386 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1757886660 | 47 Count | 378 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1757884858 | 46 Count | 371 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1757883055 | 45 Count | 364 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1757881252 | 44 Count | 357 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1757879449 | 43 Count | 350 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1757877647 | 42 Count | 343 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1757875844 | 41 Count | 336 Count | 0 Count | 4.25 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)