This is the latest recevied telemetry packets stored in our database for station/object VK3XEM-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773917282 | 973 Count | 287 Count | 287 Count | 0 VDC | 0 VDC |
| 1773916378 | 972 Count | 287 Count | 287 Count | 0 VDC | 0 VDC |
| 1773915474 | 971 Count | 287 Count | 287 Count | 0 VDC | 0 VDC |
| 1773914569 | 970 Count | 287 Count | 287 Count | 0 VDC | 0 VDC |
| 1773913770 | 969 Count | 287 Count | 287 Count | 0 VDC | 0 VDC |
| 1773912866 | 968 Count | 287 Count | 287 Count | 0 VDC | 0 VDC |
| 1773911961 | 967 Count | 287 Count | 287 Count | 0 VDC | 0 VDC |
| 1773911057 | 966 Count | 287 Count | 287 Count | 0 VDC | 0 VDC |
| 1773910151 | 965 Count | 287 Count | 287 Count | 0 VDC | 0 VDC |
| 1773909247 | 964 Count | 287 Count | 287 Count | 0 VDC | 0 VDC |
| 1773908343 | 963 Count | 287 Count | 287 Count | 0 VDC | 0 VDC |
| 1773907439 | 962 Count | 287 Count | 287 Count | 0 VDC | 0 VDC |
| 1773906534 | 961 Count | 287 Count | 287 Count | 0 VDC | 0 VDC |
| 1773905630 | 960 Count | 287 Count | 287 Count | 0 VDC | 0 VDC |
| 1773904726 | 956 Count | 284 Count | 284 Count | 0 VDC | 0 VDC |
| 1773903822 | 941 Count | 270 Count | 270 Count | 0 VDC | 0 VDC |
| 1773902917 | 937 Count | 267 Count | 267 Count | 0 VDC | 0 VDC |
| 1773902013 | 935 Count | 266 Count | 266 Count | 0 VDC | 0 VDC |
| 1773901109 | 934 Count | 266 Count | 266 Count | 0 VDC | 0 VDC |
| 1773900205 | 926 Count | 259 Count | 259 Count | 0 VDC | 0 VDC |
| 1773899299 | 925 Count | 259 Count | 259 Count | 0 VDC | 0 VDC |
| 1773898395 | 924 Count | 259 Count | 259 Count | 0 VDC | 0 VDC |
| 1773897491 | 923 Count | 259 Count | 259 Count | 0 VDC | 0 VDC |
| 1773896587 | 922 Count | 259 Count | 259 Count | 0 VDC | 0 VDC |
| 1773895681 | 921 Count | 259 Count | 259 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)