This is the latest recevied telemetry packets stored in our database for station/object SP9CXD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1757871054 | 62 Count | 510 Count | 29 Count | 4.21 VDC | 0 VDC |
| 1757870451 | 60 Count | 494 Count | 28 Count | 4.2 VDC | 0 VDC |
| 1757869852 | 58 Count | 477 Count | 27 Count | 4.21 VDC | 0 VDC |
| 1757869250 | 56 Count | 461 Count | 26 Count | 4.2 VDC | 0 VDC |
| 1757868649 | 54 Count | 441 Count | 25 Count | 4.21 VDC | 0 VDC |
| 1757868049 | 52 Count | 425 Count | 24 Count | 4.2 VDC | 0 VDC |
| 1757867448 | 50 Count | 405 Count | 23 Count | 4.2 VDC | 0 VDC |
| 1757866848 | 48 Count | 381 Count | 22 Count | 4.21 VDC | 0 VDC |
| 1757866247 | 46 Count | 362 Count | 21 Count | 4.2 VDC | 0 VDC |
| 1757865648 | 44 Count | 341 Count | 20 Count | 4.2 VDC | 0 VDC |
| 1757865046 | 42 Count | 311 Count | 19 Count | 4.21 VDC | 0 VDC |
| 1757864447 | 40 Count | 293 Count | 18 Count | 4.21 VDC | 0 VDC |
| 1757863844 | 38 Count | 266 Count | 17 Count | 4.21 VDC | 0 VDC |
| 1757863245 | 36 Count | 248 Count | 16 Count | 4.21 VDC | 0 VDC |
| 1757862643 | 34 Count | 231 Count | 15 Count | 4.2 VDC | 0 VDC |
| 1757862042 | 32 Count | 219 Count | 14 Count | 4.21 VDC | 0 VDC |
| 1757861441 | 30 Count | 199 Count | 13 Count | 4.2 VDC | 0 VDC |
| 1757860843 | 28 Count | 182 Count | 12 Count | 4.2 VDC | 0 VDC |
| 1757860242 | 26 Count | 173 Count | 11 Count | 4.2 VDC | 0 VDC |
| 1757859641 | 24 Count | 161 Count | 10 Count | 4.2 VDC | 0 VDC |
| 1757859040 | 22 Count | 155 Count | 9 Count | 4.2 VDC | 0 VDC |
| 1757858440 | 20 Count | 145 Count | 8 Count | 4.2 VDC | 0 VDC |
| 1757857839 | 18 Count | 132 Count | 7 Count | 4.21 VDC | 0 VDC |
| 1757857239 | 16 Count | 120 Count | 6 Count | 4.2 VDC | 0 VDC |
| 1757856658 | 10 Count | 94 Count | 5 Count | 4.2 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)