This is the latest recevied telemetry packets stored in our database for station/object SP9CXD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789247142 | 314 Count | 451 Count | 36 Count | 3.97 VDC | 0 VDC |
| 1789246841 | 313 Count | 450 Count | 36 Count | 3.97 VDC | 0 VDC |
| 1789246540 | 312 Count | 448 Count | 36 Count | 3.96 VDC | 0 VDC |
| 1789246240 | 309 Count | 443 Count | 34 Count | 3.96 VDC | 0 VDC |
| 1789245939 | 308 Count | 442 Count | 34 Count | 3.96 VDC | 0 VDC |
| 1789245638 | 307 Count | 441 Count | 34 Count | 3.97 VDC | 0 VDC |
| 1789245337 | 304 Count | 437 Count | 32 Count | 3.97 VDC | 0 VDC |
| 1789245036 | 303 Count | 436 Count | 32 Count | 3.98 VDC | 0 VDC |
| 1789244736 | 302 Count | 435 Count | 32 Count | 3.98 VDC | 0 VDC |
| 1789244435 | 300 Count | 433 Count | 31 Count | 3.98 VDC | 0 VDC |
| 1789244134 | 299 Count | 431 Count | 31 Count | 3.98 VDC | 0 VDC |
| 1789243834 | 298 Count | 429 Count | 31 Count | 3.98 VDC | 0 VDC |
| 1789243533 | 297 Count | 428 Count | 31 Count | 3.99 VDC | 0 VDC |
| 1789243232 | 296 Count | 427 Count | 31 Count | 3.99 VDC | 0 VDC |
| 1789242931 | 295 Count | 425 Count | 31 Count | 3.99 VDC | 0 VDC |
| 1789242630 | 294 Count | 423 Count | 31 Count | 3.99 VDC | 0 VDC |
| 1789242330 | 286 Count | 412 Count | 24 Count | 4 VDC | 0 VDC |
| 1789242029 | 281 Count | 405 Count | 20 Count | 3.99 VDC | 0 VDC |
| 1789241729 | 280 Count | 404 Count | 20 Count | 3.97 VDC | 0 VDC |
| 1789241428 | 279 Count | 403 Count | 20 Count | 3.98 VDC | 0 VDC |
| 1789241127 | 278 Count | 402 Count | 20 Count | 3.99 VDC | 0 VDC |
| 1789240827 | 277 Count | 400 Count | 20 Count | 4 VDC | 0 VDC |
| 1789240526 | 276 Count | 398 Count | 20 Count | 4.01 VDC | 0 VDC |
| 1789240225 | 275 Count | 397 Count | 20 Count | 4.01 VDC | 0 VDC |
| 1789239924 | 274 Count | 396 Count | 20 Count | 4.01 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)