This is the latest recevied telemetry packets stored in our database for station/object EA1RFI-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1757941577 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1757940676 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1757939776 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1757938875 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1757937974 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1757937073 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1757936174 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1757935273 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1757934372 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1757933472 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1757932572 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1757931671 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1757930771 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1757929870 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1757928969 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1757928069 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1757927168 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1757926268 | 3.63 VDC | 0 | 0 | 0 | 0 |
| 1757925367 | 3.63 VDC | 0 | 0 | 0 | 0 |
| 1757924466 | 3.63 VDC | 0 | 0 | 0 | 0 |
| 1757923565 | 3.63 VDC | 0 | 0 | 0 | 0 |
| 1757922665 | 3.64 VDC | 0 | 0 | 0 | 0 |
| 1757921764 | 3.64 VDC | 0 | 0 | 0 | 0 |
| 1757920864 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1757919964 | 3.65 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)