This is the latest recevied telemetry packets stored in our database for station/object EA8EE-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BAR* | BAT* | SAT* |
|---|---|---|---|---|---|
| 1765570293 | 30.45 °C | 35.6 %RH | 828 hPa | 4.17 V | 5 |
| 1765570266 | 30.45 °C | 35.7 %RH | 828 hPa | 4.17 V | 5 |
| 1765570217 | 30.44 °C | 35.5 %RH | 828 hPa | 4.18 V | 5 |
| 1765570209 | 30.44 °C | 35.5 %RH | 828 hPa | 4.18 V | 5 |
| 1765570136 | 30.44 °C | 35.4 %RH | 828 hPa | 4.17 V | 5 |
| 1765570051 | 30.45 °C | 35.4 %RH | 828 hPa | 4.18 V | 0 |
| 1765569937 | 30.47 °C | 35.5 %RH | 828 hPa | 4.17 V | 0 |
| 1765569132 | 30.62 °C | 36.1 %RH | 828 hPa | 4.17 V | 5 |
| 1765569123 | 30.63 °C | 36.2 %RH | 828 hPa | 4.17 V | 0 |
| 1765568509 | 30.53 °C | 36.4 %RH | 828 hPa | 4.17 V | 5 |
| 1765568484 | 30.52 °C | 36.4 %RH | 828 hPa | 4.18 V | 5 |
| 1765568408 | 30.45 °C | 36.7 %RH | 828 hPa | 4.18 V | 6 |
| 1765568347 | 30.45 °C | 36.5 %RH | 828 hPa | 4.18 V | 5 |
| 1765568327 | 30.45 °C | 36.7 %RH | 828 hPa | 3.94 V | 5 |
| 1765568318 | 30.46 °C | 36.8 %RH | 828 hPa | 4.17 V | 5 |
| 1765568255 | 30.5 °C | 36.6 %RH | 828 hPa | 3.99 V | 5 |
| 1765568246 | 30.5 °C | 37.9 %RH | 828 hPa | 4.17 V | 0 |
| 1765566378 | 32.06 °C | 34.8 %RH | 828 hPa | 3.94 V | 6 |
| 1765566369 | 32.06 °C | 34.8 %RH | 828 hPa | 3.98 V | 5 |
| 1765566132 | 32.27 °C | 34.9 %RH | 828 hPa | 4.18 V | 4 |
| 1765566098 | 32.34 °C | 34.7 %RH | 828 hPa | 3.98 V | 5 |
| 1765565610 | 32.11 °C | 35.6 %RH | 828 hPa | 4.19 V | 4 |
| 1765565591 | 32.06 °C | 35.7 %RH | 828 hPa | 4.18 V | 4 |
| 1765565575 | 32.04 °C | 35.7 %RH | 828 hPa | 4.19 V | 5 |
| 1765565563 | 31.97 °C | 36 %RH | 828 hPa | 4.19 V | 5 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
BAR: 0, 0.1, 0
BAT: 0, 0.01, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)