This is the latest recevied telemetry packets stored in our database for station/object EA4ENG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1767368404 | 116 Count | 1 Count | 0 Count | 3.58 VDC | 0 VDC |
| 1767366597 | 114 Count | 1 Count | 0 Count | 3.58 VDC | 0 VDC |
| 1767364790 | 112 Count | 1 Count | 0 Count | 3.58 VDC | 0 VDC |
| 1767362983 | 110 Count | 1 Count | 0 Count | 3.59 VDC | 0 VDC |
| 1767361176 | 108 Count | 1 Count | 0 Count | 3.6 VDC | 0 VDC |
| 1767359369 | 106 Count | 1 Count | 0 Count | 3.59 VDC | 0 VDC |
| 1767357562 | 104 Count | 1 Count | 0 Count | 3.59 VDC | 0 VDC |
| 1767355755 | 102 Count | 1 Count | 0 Count | 3.6 VDC | 0 VDC |
| 1767353948 | 100 Count | 1 Count | 0 Count | 3.58 VDC | 0 VDC |
| 1767352140 | 98 Count | 1 Count | 0 Count | 3.6 VDC | 0 VDC |
| 1767350333 | 96 Count | 1 Count | 0 Count | 3.6 VDC | 0 VDC |
| 1767348526 | 94 Count | 1 Count | 0 Count | 3.59 VDC | 0 VDC |
| 1767346728 | 92 Count | 1 Count | 0 Count | 3.61 VDC | 0 VDC |
| 1767344911 | 90 Count | 1 Count | 0 Count | 3.61 VDC | 0 VDC |
| 1767343103 | 88 Count | 1 Count | 0 Count | 3.61 VDC | 0 VDC |
| 1767341296 | 86 Count | 1 Count | 0 Count | 3.61 VDC | 0 VDC |
| 1767339489 | 84 Count | 1 Count | 0 Count | 3.61 VDC | 0 VDC |
| 1767338027 | 82 Count | 1 Count | 0 Count | 3.62 VDC | 0 VDC |
| 1767336220 | 80 Count | 1 Count | 0 Count | 3.62 VDC | 0 VDC |
| 1767334412 | 78 Count | 1 Count | 0 Count | 3.6 VDC | 0 VDC |
| 1767332605 | 76 Count | 1 Count | 0 Count | 3.63 VDC | 0 VDC |
| 1767330798 | 74 Count | 1 Count | 0 Count | 3.63 VDC | 0 VDC |
| 1767328991 | 72 Count | 1 Count | 0 Count | 3.63 VDC | 0 VDC |
| 1767327184 | 70 Count | 1 Count | 0 Count | 3.64 VDC | 0 VDC |
| 1767325376 | 68 Count | 1 Count | 0 Count | 3.61 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)