EA2RCF LoRa APRS MAP

My position About Go to BACKUP map Powered by EA2RCF Radioclub Foronda ☰

reset

M7AQH-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object M7AQH-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BARO*	SAT*
1756550668	24.12 C	61.02 %	980.6 hPa	14
1756550368	24.1 C	60.83 %	980.7 hPa	15
1756550068	24.03 C	60.89 %	980.6 hPa	16
1756549768	24.03 C	60.89 %	980.6 hPa	16
1756549468	24.06 C	60.77 %	980.7 hPa	16
1756549167	24.03 C	61 %	980.7 hPa	17
1756548868	23.89 C	61.01 %	980.7 hPa	17
1756548568	23.8 C	60.52 %	980.7 hPa	14
1756548267	23.79 C	61.11 %	980.7 hPa	17
1756547967	23.73 C	61.08 %	980.8 hPa	16
1756547668	23.6 C	61.48 %	981 hPa	16
1756547368	23.57 C	61.66 %	981.1 hPa	16
1756547068	23.57 C	61.42 %	981.1 hPa	16
1756546768	23.6 C	61.46 %	981.2 hPa	17
1756546467	23.51 C	61.44 %	981.2 hPa	17
1756546167	23.5 C	61.43 %	981.2 hPa	17
1756545868	23.39 C	61.65 %	981.1 hPa	17
1756545567	23.34 C	61.76 %	981.1 hPa	15
1756545267	23.42 C	61.53 %	981 hPa	17
1756544967	23.29 C	61.88 %	981 hPa	17
1756544667	23.2 C	61.74 %	981 hPa	17
1756544367	23.13 C	61.69 %	981 hPa	16
1756544067	22.9 C	61.95 %	981 hPa	15
1756543767	22.87 C	62.23 %	981 hPa	14
1756543467	22.87 C	61.85 %	981 hPa	15

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.01, 0

BARO: 0, 0.1, 800

BAT: 0, 0.01, 0

SAT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)