This is the latest recevied telemetry packets stored in our database for station/object IQ9DM-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1757928850 | 220 Count | 363 Count | 211 Count | 4.18 VDC | 0 VDC |
| 1757927037 | 193 Count | 316 Count | 185 Count | 4.17 VDC | 0 VDC |
| 1757925224 | 176 Count | 276 Count | 169 Count | 4.12 VDC | 0 VDC |
| 1757923410 | 155 Count | 238 Count | 149 Count | 4.18 VDC | 0 VDC |
| 1757921597 | 127 Count | 195 Count | 122 Count | 4.11 VDC | 0 VDC |
| 1757919793 | 106 Count | 162 Count | 102 Count | 4.14 VDC | 0 VDC |
| 1757917987 | 83 Count | 130 Count | 80 Count | 4.14 VDC | 0 VDC |
| 1757916287 | 65 Count | 101 Count | 63 Count | 4.19 VDC | 0 VDC |
| 1757914469 | 43 Count | 67 Count | 42 Count | 4.2 VDC | 0 VDC |
| 1757912666 | 21 Count | 34 Count | 21 Count | 4.17 VDC | 0 VDC |
| 1757910860 | 631 Count | 1022 Count | 606 Count | 4.14 VDC | 0 VDC |
| 1757909059 | 608 Count | 984 Count | 584 Count | 4.15 VDC | 0 VDC |
| 1757907246 | 588 Count | 953 Count | 565 Count | 4.11 VDC | 0 VDC |
| 1757905433 | 570 Count | 920 Count | 548 Count | 4.18 VDC | 0 VDC |
| 1757903619 | 550 Count | 887 Count | 529 Count | 4.13 VDC | 0 VDC |
| 1757901801 | 531 Count | 851 Count | 511 Count | 4.17 VDC | 0 VDC |
| 1757899987 | 508 Count | 809 Count | 489 Count | 4.17 VDC | 0 VDC |
| 1757898174 | 477 Count | 757 Count | 459 Count | 4.11 VDC | 0 VDC |
| 1757896371 | 452 Count | 716 Count | 435 Count | 4.18 VDC | 0 VDC |
| 1757894612 | 429 Count | 678 Count | 413 Count | 4.14 VDC | 0 VDC |
| 1757892808 | 405 Count | 639 Count | 390 Count | 4.12 VDC | 0 VDC |
| 1757891005 | 384 Count | 603 Count | 370 Count | 4.15 VDC | 0 VDC |
| 1757889202 | 361 Count | 567 Count | 348 Count | 4.21 VDC | 0 VDC |
| 1757887398 | 335 Count | 530 Count | 323 Count | 4.15 VDC | 0 VDC |
| 1757885595 | 307 Count | 490 Count | 296 Count | 4.17 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)