This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1741906960 | 0 Count | 89 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1741905160 | 9 Count | 1013 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1741903361 | 8 Count | 921 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1741901561 | 7 Count | 815 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1741899762 | 6 Count | 689 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1741897962 | 5 Count | 616 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1741896163 | 4 Count | 542 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1741894363 | 3 Count | 468 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1741892564 | 2 Count | 329 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1741890764 | 1 Count | 238 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1741888965 | 0 Count | 109 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1741887165 | 21 Count | 1082 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1741885366 | 20 Count | 972 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1741883566 | 19 Count | 887 Count | 0 Count | 4.23 VDC | 0.8 VDC |
| 1741881766 | 18 Count | 802 Count | 0 Count | 4.24 VDC | 1.92 VDC |
| 1741879968 | 17 Count | 663 Count | 0 Count | 4.24 VDC | 4.22 VDC |
| 1741878168 | 16 Count | 558 Count | 0 Count | 4.24 VDC | 4.22 VDC |
| 1741876368 | 15 Count | 468 Count | 0 Count | 4.25 VDC | 4.22 VDC |
| 1741874569 | 14 Count | 451 Count | 0 Count | 4.25 VDC | 4.22 VDC |
| 1741872770 | 13 Count | 431 Count | 0 Count | 4.25 VDC | 4.22 VDC |
| 1741870972 | 12 Count | 383 Count | 0 Count | 4.25 VDC | 4.22 VDC |
| 1741869172 | 11 Count | 369 Count | 0 Count | 4.25 VDC | 4.22 VDC |
| 1741867372 | 10 Count | 357 Count | 0 Count | 4.25 VDC | 4.2 VDC |
| 1741865573 | 9 Count | 341 Count | 0 Count | 4.25 VDC | 4.2 VDC |
| 1741863773 | 8 Count | 326 Count | 0 Count | 4.25 VDC | 4.2 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)