This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1745964999 | 9 Count | 433 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1745963199 | 8 Count | 384 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1745961400 | 7 Count | 334 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1745959601 | 6 Count | 282 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1745957801 | 5 Count | 238 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1745956001 | 4 Count | 191 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1745954202 | 3 Count | 147 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1745952402 | 2 Count | 101 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1745950603 | 1 Count | 50 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1745948803 | 0 Count | 13 Count | 0 Count | 4.22 VDC | 2.8 VDC |
| 1745947006 | 39 Count | 1007 Count | 0 Count | 4.23 VDC | 5.4 VDC |
| 1745945207 | 38 Count | 998 Count | 0 Count | 4.24 VDC | 5.4 VDC |
| 1745943410 | 37 Count | 991 Count | 0 Count | 4.24 VDC | 5.42 VDC |
| 1745941611 | 36 Count | 983 Count | 0 Count | 4.24 VDC | 5.42 VDC |
| 1745939811 | 35 Count | 976 Count | 0 Count | 4.24 VDC | 5.42 VDC |
| 1745938012 | 34 Count | 967 Count | 0 Count | 4.24 VDC | 5.44 VDC |
| 1745936212 | 33 Count | 956 Count | 0 Count | 4.24 VDC | 5.42 VDC |
| 1745934413 | 32 Count | 948 Count | 0 Count | 4.25 VDC | 5.42 VDC |
| 1745932615 | 31 Count | 926 Count | 0 Count | 4.25 VDC | 5.44 VDC |
| 1745930815 | 30 Count | 915 Count | 0 Count | 4.25 VDC | 5.42 VDC |
| 1745929016 | 29 Count | 907 Count | 0 Count | 4.25 VDC | 5.42 VDC |
| 1745927216 | 28 Count | 899 Count | 0 Count | 4.25 VDC | 5.4 VDC |
| 1745925416 | 27 Count | 890 Count | 0 Count | 4.25 VDC | 5.42 VDC |
| 1745923617 | 26 Count | 881 Count | 0 Count | 4.25 VDC | 4.34 VDC |
| 1745921816 | 25 Count | 864 Count | 0 Count | 4.25 VDC | 4.32 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)