This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789243212 | 61 Count | 119 Count | 57 Count | 4.12 VDC | 0 VDC |
| 1789241413 | 48 Count | 92 Count | 45 Count | 4.12 VDC | 0 VDC |
| 1789239611 | 35 Count | 70 Count | 33 Count | 4.11 VDC | 0 VDC |
| 1789237812 | 24 Count | 47 Count | 23 Count | 4.12 VDC | 0 VDC |
| 1789236010 | 12 Count | 25 Count | 12 Count | 4.12 VDC | 0 VDC |
| 1789234210 | 507 Count | 1011 Count | 461 Count | 4.12 VDC | 0 VDC |
| 1789232408 | 497 Count | 992 Count | 452 Count | 4.12 VDC | 0 VDC |
| 1789230609 | 486 Count | 967 Count | 442 Count | 4.12 VDC | 0 VDC |
| 1789228808 | 475 Count | 945 Count | 432 Count | 4.12 VDC | 0 VDC |
| 1789227007 | 462 Count | 920 Count | 420 Count | 4.12 VDC | 0 VDC |
| 1789225206 | 451 Count | 897 Count | 410 Count | 4.12 VDC | 0 VDC |
| 1789223405 | 438 Count | 872 Count | 398 Count | 4.12 VDC | 0 VDC |
| 1789221604 | 427 Count | 851 Count | 388 Count | 4.12 VDC | 0 VDC |
| 1789219803 | 418 Count | 832 Count | 380 Count | 4.12 VDC | 0 VDC |
| 1789218003 | 406 Count | 811 Count | 369 Count | 4.12 VDC | 0 VDC |
| 1789216202 | 395 Count | 790 Count | 359 Count | 4.12 VDC | 0 VDC |
| 1789214402 | 384 Count | 768 Count | 349 Count | 4.12 VDC | 0 VDC |
| 1789212601 | 373 Count | 747 Count | 339 Count | 4.12 VDC | 0 VDC |
| 1789210800 | 362 Count | 727 Count | 329 Count | 4.12 VDC | 0 VDC |
| 1789209000 | 353 Count | 707 Count | 321 Count | 4.12 VDC | 0 VDC |
| 1789207199 | 340 Count | 681 Count | 309 Count | 4.12 VDC | 0 VDC |
| 1789205398 | 329 Count | 659 Count | 299 Count | 4.12 VDC | 0 VDC |
| 1789203598 | 321 Count | 642 Count | 292 Count | 4.12 VDC | 0 VDC |
| 1789201797 | 309 Count | 619 Count | 281 Count | 4.12 VDC | 0 VDC |
| 1789199996 | 298 Count | 599 Count | 271 Count | 4.12 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)